Question: How Many Grades Of Bolts Are There?

What is a grade 2 bolt?

Grade 2 bolts ( A307) are a standard hardware grade steel.

This is the least expensive and most common.

They have a tensile strength of 60,000 PSI.

Usually a tensile strength in the range of 112,000 to 116,000 PSI.

In the metric world (a.k.a.

ISO) the most common bolts are marked with an 8.8, 10.9, or 12.9..

What is the difference between Grade 5 and Grade 8 bolts?

Grade 8 bolts have been hardened more than grade 5 bolts. Thus they are stronger and are used in demanding applications such as automotive suspensions. Grade 8 bolts have 6 evenly spaced radial lines on the head. Grade G is roughly equivalent to Grade 8.

What is the hardest bolt you can buy?

BUMAX® Ultra has proven itself as the world’s strongest bolt – in various highly-demanding critical fastener applications around the world where standard fasteners are simply inadequate.

What is the difference between 8.8 and 12.9 grade bolts?

The mechanical difference between the 12.9 and 8.8 is yield strength (roughly 90% of 1200 MPa vs 80% of 800 MPa). That means the 12.9 can be stretched further (i.e. torqued to some higher value) before it yields, which of course increases the clamp force.

Are stainless bolts stronger than Grade 8?

Stainless steel bolts are rated for corrosion resistance. Bolt strength is rated in PSI (pounds per square inch). A stainless steel bolt has the same PSI rating as a grade 5 bolt (125,000 PSI). A grade 8 bolt has a stronger rating with a PSI of 150,000.

What is the difference between a 10.9 and 12.9 Bolt?

12.9 grade steel has 120% of the tensile strength of 10.9 grade steel. The “12” prefix indicates a tensile strength of X100 N/mm^2 and the “9” suffix indicates a multiplier. Both 12.9 and 10.9 have the same multiplier, so the comparison is straightforward: 12 to 10.

What grade bolt has the highest shear strength?

They are commonly used at high stress points in connecting devices.12.9 Bolts. A 12.9 bolt is one of the highest grade of bolts produced. … 12.9 Shear Strength. The minimum tensile strength of a 12.9 bolt is 1220 MPa.

What grade are ARP bolts?

Explains how ARP polished stainless steel and black oxide finished 8740 bolts are stronger than SAE Grade 5 or Grade 8 fasteners, as well as ISO 8.8 and 10.9 rated metric bolts. ARP accessory bolts are nominally rated at 170,000 psi tensile strength, far superior to the 120,000 of Grade 5 and 150,000 Grade 8 ratings.

Is there a grade 10 bolt?

Class 10. This is a metric nut grading similar to the SAE grade 8 classification, which is used in conjunction with Class 10.9 bolts. This strength of nut is used in automotive, and structural industries, as well as in high temp applications.

What does 12.9 mean on a bolt?

The minimum ultimate tensile strength of the Grade 12.9 Metric Hex Head Bolts is about 1242 Mpa or 180,000 PSI, making them the highest grade of bolts produced.In fact, the Grade 12.9 Nuts is known for their high tensile strength.

Are higher grade bolts more brittle?

One common misconception about bolts is that a higher rated bolt is stronger, yet more brittle, and therefore lower grades should be used in places like in suspension systems so they can deform rather then break. This is wrong! There are two types of forces a bolt experiences, tension and shear.

How can you tell if a bolt is high tensile?

To identify this grade, look out for an ‘8.8’ stamp or a set of three radial lines on the head of the bolt. Most often, customers looking for a high tensile bolt may just be looking for the 8.8 grade.

Will Grade 8 bolts rust?

Grade 8 bolts have 6 evenly spaced radial lines on the head.” Unlike stainless steel, which is highly resistant to corrosion, steel, however reinforced, will oxidize over time and rust. Grade 8 bolts that are not galvanized or plated with yellow zinc, however, are cheaper.

What is the meaning of 10.9 grade in a bolt?

Grade 10.9 metric bolts are manufactured using medium carbon steel, medium carbon steel alloy and low carbon boron steel that has been quenched and tempered. Used in automotive applications and for bolting large and forged parts, metric 10.9 bolts exhibit high tensile strength and good wear resistance.

What is the highest grade bolt?

The strongest commercial-quality bolt is grade 8, marked by six raised dashes; its medium-carbon alloy steel has been quenched and tempered to achieve a tensile strength of 150,000 psi.

Is a 12.9 Bolt stronger than Grade 8?

Many fasteners (screws, etc.), especially smaller sizes, are typically not graded—their strength isn’t specified….Table 1.Grade/ClassStrengthMetric Class 8.8Similar to Grade 5.Metric Class 10.9Similar to Grade 8.Metric Class 12.9The highest metric class for strength, it exceeds Grade 8.11 more rows

Is grade C the same as Grade 8?

Grade C. Grade C is a thru-hardened medium carbon zinc plated alloy steel. No head markings (manufacturers mark may also be included). Finish is equivalent in strength to Grade 8 but without the yellow color.

What grade bolt means?

The grade of a bolt determines the maximum amount of stress (tensile strength) that the bolt can handle. Tensile strength is the amount of pull the bolt can withstand before breaking. The method used for tightening the bolt is also dependent upon the grade of the bolt.

How much force can a bolt take?

Steel bolts are graded according to newtons per millimeter squared for bolt tensile strength as compared to yield strength. For example, a steel bolt with a rating of 5.5 will provide roughly 500 newtons/mm2 of bolt tensile strength and approximately 400 newtons/mm2 of yield strength.