Quick Answer: What Is The Hardest Grade Bolt?

Is a 10.9 Bolt stronger than Grade 8?

Class 10.9 is stronger than class 8.8.

It is commonly found in high strength automotive applications.

Class 10.9 is similar to grade 8.

A low carbon steel for general use..

What are the different grades of bolts?

There are several grades of bolts but the three common grades for SAE are 2, 5 and 8. The common class (grades) for metric are 5.8, 8.8, 10.9 and 12.9. Each grade has a specific bolt strength. No matter the system used to grade the bolts, the higher the number means the stronger the bolt.

What is the strongest bolt grade?

grade 8The strongest commercial-quality bolt is grade 8, marked by six raised dashes; its medium-carbon alloy steel has been quenched and tempered to achieve a tensile strength of 150,000 psi.

Are titanium bolts stronger than steel?

Titanium bolts can be as strong as mild steel or stainless steel bolts. Titanium bolts are not as strong as high-tensile steel bolts.

What is the hardest bolt?

BUMAX® UltraBUMAX® Ultra has proven itself as the world’s strongest bolt – in various highly-demanding critical fastener applications around the world where standard fasteners are simply inadequate.

What grade are hardened bolts?

Grade 5Grade 5 bolts are hardened to increase strength and are the most common bolts found in automotive applications. Grade 5 bolts have 3 evenly spaced radial lines on the head. Grade F is roughly equivalent to Grade 5.

What is the difference between a 10.9 and 12.9 Bolt?

12.9 grade steel has 120% of the tensile strength of 10.9 grade steel. The “12” prefix indicates a tensile strength of X100 N/mm^2 and the “9” suffix indicates a multiplier. Both 12.9 and 10.9 have the same multiplier, so the comparison is straightforward: 12 to 10.

What is the difference between 8.8 and 12.9 grade bolts?

The mechanical difference between the 12.9 and 8.8 is yield strength (roughly 90% of 1200 MPa vs 80% of 800 MPa). That means the 12.9 can be stretched further (i.e. torqued to some higher value) before it yields, which of course increases the clamp force.

What does 10.9 on a bolt head mean?

Grade 10.9 metric bolts are manufactured using medium carbon steel, medium carbon steel alloy and low carbon boron steel that has been quenched and tempered. Used in automotive applications and for bolting large and forged parts, metric 10.9 bolts exhibit high tensile strength and good wear resistance.

How much force can a bolt take?

Steel bolts are graded according to newtons per millimeter squared for bolt tensile strength as compared to yield strength. For example, a steel bolt with a rating of 5.5 will provide roughly 500 newtons/mm2 of bolt tensile strength and approximately 400 newtons/mm2 of yield strength.

What does 12.9 mean on a bolt?

The minimum ultimate tensile strength of the Grade 12.9 Metric Hex Head Bolts is about 1242 Mpa or 180,000 PSI, making them the highest grade of bolts produced.In fact, the Grade 12.9 Nuts is known for their high tensile strength.

Are stainless steel bolts stronger than Grade 8?

Stainless steel bolts are rated for corrosion resistance. Bolt strength is rated in PSI (pounds per square inch). A stainless steel bolt has the same PSI rating as a grade 5 bolt (125,000 PSI). A grade 8 bolt has a stronger rating with a PSI of 150,000.

How can you tell if a bolt is high tensile?

To identify this grade, look out for an ‘8.8’ stamp or a set of three radial lines on the head of the bolt. Most often, customers looking for a high tensile bolt may just be looking for the 8.8 grade.

What grade are ARP bolts?

Explains how ARP polished stainless steel and black oxide finished 8740 bolts are stronger than SAE Grade 5 or Grade 8 fasteners, as well as ISO 8.8 and 10.9 rated metric bolts. ARP accessory bolts are nominally rated at 170,000 psi tensile strength, far superior to the 120,000 of Grade 5 and 150,000 Grade 8 ratings.

What grade bolt has the highest shear strength?

They are commonly used at high stress points in connecting devices.12.9 Bolts. A 12.9 bolt is one of the highest grade of bolts produced. … 12.9 Shear Strength. The minimum tensile strength of a 12.9 bolt is 1220 MPa.

Can Grade 8 bolts be reused?

Mechanically, bolts may be reused provided the bolt never exceeded its yield point: a simple enough definition, but one that is more complicated than it may appear. This is because it is nearly impossible to verify if a bolt has ever been tensioned past the yield point.

Is there a grade 10 bolt?

Class 10. This is a metric nut grading similar to the SAE grade 8 classification, which is used in conjunction with Class 10.9 bolts. This strength of nut is used in automotive, and structural industries, as well as in high temp applications.

Will Grade 8 bolts rust?

Grade 8 bolts have 6 evenly spaced radial lines on the head.” Unlike stainless steel, which is highly resistant to corrosion, steel, however reinforced, will oxidize over time and rust. Grade 8 bolts that are not galvanized or plated with yellow zinc, however, are cheaper.

Is grade C the same as Grade 8?

Grade C. Grade C is a thru-hardened medium carbon zinc plated alloy steel. No head markings (manufacturers mark may also be included). Finish is equivalent in strength to Grade 8 but without the yellow color.

Is there a grade 12 bolt?

Do Grade 12 bolts exist? No SAE Grade 12 exists. On the metric side, there are no grades, only property classes. The highest strength property class is 12.9 which requires a tensile strength of approximately 1200 MPa and a yield strength of about 1080 MPa.